Thanks to Food52 for this:
The key to this starts with cannabutter, which is butter that’s been melted and steeped with activated weed. Just about any fat (olive oil, coconut oil, etc.) can be infused with weed, but cannabutter is the most iconic. You can bake and cook with cannabutter (also called weed butter) to infuse all sorts of recipes—from fudgy brownies (a classic choice) to the best spaghetti sauce ever.
While the concept is simple, the process is—by necessity—a methodical one, meaning you’ll want to pay close attention to the steps and quantities at every turn, as well as the dosing. You’ll also want to make sure you have access to quality weed from a trusted source (living in a state where it’s legally distributed helps).
I had the opportunity to get my cannabutter recipe down to an exact science via CW Analytical*, a California-based quality assurance testing lab for cannabis products. I worked with their team to run a series of cannabutter experiments (we collected data on four different variables, including butter infusion) and found the most efficient method.
So whether you’re an edible newbie or a seasoned canna-sseur, here’s a step-by-step guide to making weed butter at home, with tips along the way on improving its flavor, using it once it’s ready, and making sure you’re dosing carefully.
Step 1: Gather A Few Tools & Ingredients
In order to make cannabutter at home, you’ll need a few tools and ingredients—some are probably already lying around your kitchen, others you may need to specially stock up on.
For the decarboxylation (more on what that means in a minute):
- 1 gram of quality cannabis flower
- Parchment-lined baking sheet
- Scissors (optional)
- Wooden spoon
- Grinder
For making the cannabutter:
- Unsalted butter (use the amount of butter your infused recipe calls for)
- 1/4 cup water
- Small saucepan
- Candy thermometer
- Fine mesh strainer
- Food-safe storage container
Step 2: Use High-Quality Weed
As any chef will tell you, ingredients matter. Whether you’re using a stash rediscovered during your 10-year high school reunion (which will impart a soporific effect) or high-quality weed straight from a dispensary, it will have an impact on the potency and flavor of the final cannabutter.
Most edibles traditionally use cannabutter made with trim or shake, which are the leaves trimmed from the cannabis flowers after harvesting. However, trim and shake have more plant matter, which means they have more chlorophyll; more chlorophyll equals more bitterness in the final product.
Personally, I prefer to cook with hash (also called hashish) or grinder kief, a concentration of the crystal-laden resin in weed. But for simplicity’s sake, start with one gram of quality cannabis flower—this refers to the part of the cannabis plant that has been cultivated, harvested, dried, and cured for smoking.
While a lot of pre-packaged edibles, like the kinds you can buy premade at a dispensary, use the terms “indica” (which refers to a body high) or “sativa” (an active high), that’s more or less a marketing ploy. Why? The terpenes (essential oils of plants) that steer the effects that different strains of weed have on you (body high versus active high) don’t have the same chemical interaction in edible form.
So, when purchasing at the dispensary, focus on the THC and CBD ratios. Below is more information about what both of these do chemically, but here’s a general rule of thumb: For a balanced high, I recommend looking for a 1:1 ratio of THC and CBD—this means that for every one milligram of THC there is one milligram of CBD.
If you have a few options to choose from, follow your nose for citrus (limonene), herbal (myrcene), and peppery (caryophyllene) terpenes, then consider whether those flavors pair with the recipe you’re planning to make with the cannabutter.
Step 3: Preheat Your Weed
In its raw form, weed is non-psychoactive. Raw or live cannabis contains the cannabinoids THCA and CBDA. Sound familiar? Remove the A and you have THC (the chemical that gets you high) and CBD (which isn’t psychoactive).
To convert the THCA to THC (and CBDA to CBD), just add heat and time. This process is called decarboxylation. When you light a joint or burn a bowl, you’re decarboxylating the weed, which kickstarts its effects. The higher the heat, the faster the reaction. But when making cannabutter for edibles, using too much heat can produce a taste like burnt popcorn.
There is more than one way to decarboxylate weed, but an oven is the most efficient. Here’s how to do it:
- Heat the oven to 245°F.
- Break up the flower into smaller pieces using your hands to expose more surface area to the heat; the pieces should break off like florets of broccoli.
- Bundle the broken-up flowers in parchment. Wrap this parchment pouch in foil or place it in an airtight, oven-safe silicone bag (I use Stasher). Place in a small baking dish. Bake for 25 to 30 minutes. (After 20 minutes, roughly 70 percent of the THCA will be converted to THC; after 30 minutes, 80 percent. If this is your first time making cannabutter, I’d recommend a cook time that’s on the lower end of the range.)
- Remove the sheet pan from the oven and let the flowers cool at room temperature.
- Grind the decarboxylated, cooled flowers using a grinder before moving on to making the cannabutter. They should be ground to a medium-course consistency—like coffee, not espresso. Use the decarbed, ground cannabis right away.
Step 4: Infuse The Butter
Just like choosing high-quality weed is important, so is choosing your butter. I like to use good, unsalted butter. There’s no need for a fancy-schmancy beurre de baratte, but a high-fat, European-style unsalted butter does the trick.
Onto the infusion process: Many cannabutter recipes out there tend to go a bit overboard in this department. Most call for the already-decarboxylated weed to steep in the butter for a long time—anywhere from two to four hours. This certainly infuses the fat with cannabinoids, but it also pulls the chlorophyll and other “green” flavors from the weed, which negatively impact the taste.
Our experiment in the CW Analytical lab found that 80 to 90 percent of cannabinoids (that’s THC and CBD) infused in the butter after 45 minutes to one hour. And brown butter, which makes everything taste better, had an infusion rate of just six minutes due to the higher heat (without any degradation of the cannabinoids).
If you’re making brown cannabutter, you can go from decarb to infused butter in about 30 minutes—that breaks down to 20 or 25 minutes to decarboxylate the weed, plus 6 minutes or so to brown the butter (then it’s ready to strain and set in the fridge). Infused brown butter and bourbon banana bread, here you come.
Ready to make cannabutter? Here the best method for infusing standard butter on the stovetop:
- To a small saucepan (or a DIY double boiler—a heatproof bowl set over a pot of simmering water), add your decarboxylated, ground weed, the amount of butter in your recipe, plus 1/4 cup of water (this helps replace the water that will evaporate).
- Heat at a low simmer for 45 minutes to 1 hour, using your candy thermometer to make sure the temperature does not exceed 190°F.
- Remove the saucepan from the heat and pour the mixture through a fine mesh strainer into a food-safe container. (Cheesecloth works too, but it soaks up a lot of precious butter.)
- Cover and let the butter set in the fridge, then pour off any remaining water.
Step 5: Cook With Your Cannabutter
Now that your cannabutter is activated and infused, it’s ready to use. Just keep in mind that the shelf life is shorter than regular butter—about one to two weeks if it’s tightly wrapped. So bake or cook with it (using the same amount of butter the recipe calls for) as soon as possible. You can also freeze it for up to six months. I like to keep a log of infused cookie dough in the freezer and slice off one cookie’s worth to bake before bedtime every night.
Most edible recipes skip an important note: A significant amount of decarboxylation occurs in the oven while the cookie, brownie, or other edible is baking. We tested my Aunty Yo’s approach—which is to take store-bought cookie dough and simply mix in raw, ground weed—at the CW Analytical lab. We found that the THC activated up to 35 percent. That’s why we only decarboxylate the weed for 20 to 30 minutes—because the cannabutter’s potency will further increase as the edible itself bakes or cooks.
Step 6: Easy Dose It
Properly dosing can be tricky for homemade, and even commercially manufactured, edibles. There are a lot of variables to consider, like the potency of your weed, the inevitable loss of weed during the process, and the exact yield of a recipe. My advice? Always eat less of an edible than you think you need. If it’s your first time making them, start with half of a serving to figure out whether the dose is right for you.
Never eat more of an edible without knowing the relative potency and your tolerance—this will ensure you have a positive experience, which is why you’re here in the first place, right?
No matter what, wait at least one to two hours to start feeling the effects of the edible. Two hours might seem like a long time, but because everyone’s body chemistry is different, it can take that long. Whatever you do, don’t take more of the edible after just 30 or 45 minutes if you’re not feeling something yet.
If you live in a legal state, you can find out the exact percentage of the THC and CBD in the weed you’re buying to help gauge the potency, but according to Leafly, an average potency is hard to pinpoint.
It takes a little bit of math to figure out the exact dosing/serving size you should start with, but it’s important to do it, no matter what type of edible you’re making. Here’s an example:
- 1 gram of weed that is 15 percent THCA will have 150 milligrams of THCA.
- I recommend a starting dose of 2.5 to 5 milligrams THC.
- 1 gram of weed in 2 dozen cookies breaks down like this: 150 milligrams THC in the total batch divided by 24 cookies = 6.25 milligrams of THC per cookie.
- Start with ½ of a cookie, wait 1 to 2 hours to feel the effects, then decide if you want to try a bit more (I’d recommend adding no more than ¼ of the cookie at a time).
Keep in mind that 100 percent conversion to THC is impossible, since there is always loss during the decarboxylation, infusion, and cooking processes. Just remember to plan ahead and have some non-infused snacks to munch on once you’ve enjoyed your edible—and don’t forget to set a timer to know how long it’s been since you took it.
Fun Cannabutter Recipes
Eager to make cannabutter but not exactly sure what to do with it? Lucky for you, we’ve got options, from classic cannabis brownies to a snacky, seasoned popcorn that’s herbaceous in more ways than one.
1. Teeny-Tiny Cannabis Cookies
These cookie sandwiches contain a very low dose of THC (only 3 milligrams for one cookie sandwich, or two cookies), meaning they’re ideal for those who are new to the at-home edibles game.
Teeny-Tiny Cannabis Cookies
2. Cannabutter Popcorn With Ranch Seasoning
The ranch seasoning on this popcorn includes dried parsley, dill, chives, onion powder, garlic powder, and powdered buttermilk. Not only do these punchy, tangy, allium-heavy flavors taste good on their own—they also mask the flavor of the weed itself, which is an added bonus.
Cannabuttered Popcorn With Ranch Seasoning
3. Double Chocolate Weed Brownies
Cannabis brownies are maybe the most iconic of all the edibles. These ones are super fudgy, thanks to the inclusion of chopped dark chocolate and molasses.
Double Chocolate Weed Brownies
4. Cannabis Coconut Oil
Butter not your thing? Don’t worry—we’ve got you covered. Coconut oil provides the perfect base for plant-based edibles and any number of savory applications.
